 | Park Benjamin - 1878 - 994 strani
...an inch thicker than the thickness of iron in the respective pipe, leaving a play of three-eighths of an inch between the inside of the collar and the outside of the pipe. Л is (he lead, which is run iu and calked up tight from both sides three-eighths of an inch thick.... | |
 | Park Benjamin - 1880 - 1088 strani
...an inch thicker than the thickness of iron in the respective pipe, leaving a play of three-eighths of an inch between the inside of the collar and the...outside of the pipe. B is the lead, which is run in and ealkcd up tight from both sides three-eighths of an inch thick. A nipple of No. 9 iron is riveted in... | |
 | Augustus Jesse Bowie (Jr.) - 1885 - 358 strani
...full i!7* " K " A in% " iX " y 7 't 39 " 'H " 'A " \S II 1A " X" 'A " 39 , 1H .. iA" Joints. — The pipes in general use in the mines are II, 15, 22,...on one end of each pipe by means of six ^ rivets. .iR. ot tightening leaky joints: i**J||>Iicati(>n fur forcing back the . if 11 thr1'Mgh the expansion... | |
 | Augustus Jesse Bowie (Jr.) - 1898 - 360 strani
...wroughtiron collar, 5 inches wide, ^ °f an mcn thicker than the iron of the pipe, and with a play of -}6 of an inch between the inside of the collar and the...width, riveted on one end of each pipe by means of six 3/g-inch rivets. PIPES AND NOZZLES. Fig. 21 shows the method ot tightening leaky joints : a shows the... | |
 | 1973 - 418 strani
...placing a wrought iron ring, 5 inches wide and of sufficient diameter to leave a space of three-eighths of an inch between the inside of the collar and the outside of the pipe. This spare was filled with lead and calked to make a tight joint. A total of 35 tons of lead was required... | |
 | 1888 - 700 strani
...perpendicular. The work was entered to by Mr. Herman Schussler, who feelPLATE 20. is a play of three-eighths of an inch between the inside of the collar and the outside of the pipe. B is the lead which runs in and is then corked up tight from both sides, the thickness being three-eighths of an inch.... | |
 | Hugh A. Shamberger - 1972 - 72 strani
...placing a wrought iron ring, 5 inches wide and of sufficient diameter to leave a space of three-eighths of an inch between the inside of the collar and the outside of the pipe. This space was filled with lead and calked to make a tight joint. A total of 35 tons of lead was required... | |
| |
... of an inch between the inside of the collar and the outside of the pipe ; b is the lead, which is run in and then calked tight from both sides ; c is a nipple of No. 9 iron, 6 inches in width, riveted on one end of each pipe by means of six rivets. 